EOGB
EOGB Ignit/Ionisation Cable L=450
Ignition and ionisation cable, length L=450, for EOGB Bentone oil boilers and burners.
At a glance
- Appliance family: EOGB Bentone
£114.84
£95.70 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Ignit/Ionisation cable L=450 is an ignition and flame-sensing lead manufactured by EOGB for Bentone oil boilers and burners. It carries the high-tension ignition supply to the electrode and returns the ionisation signal used by the control box to prove flame. The lead is listed with a length of L=450.
Signs this part needs replacing
- Burner sparks but fails to light, or lights intermittently
- Control box locks out during or shortly after the ignition sequence
- Flame is established but not detected, causing repeated lockouts
- Visible damage to the lead: cracked, brittle, burnt or chafed insulation
- Loose, corroded or heat-damaged terminals at the electrode or control box end
Before you order
- Confirm the appliance is an EOGB Bentone unit and identify the burner model
- Check the routing and required reach against the listed L=450 length before fitting
- Inspect the electrode, control box terminals and lead connectors for damage or contamination
- Check that the existing lead is the cause of the fault rather than the electrode, transformer or control box
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| EOGB Bentone | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.