Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Vokera Gas Valve 9842

Vokera

Vokera Gas Valve 9842

Vokera gas valve, part number 9842, built on the Honeywell VK4105C1058 valve body for Mynute SE series boilers.

At a glance

  • Appliance family: Mynute SE series
  • Also known as 1530516
  • Gas work must be carried out by a Gas Safe registered engineer, with the appliance recommissioned and pressure-tested after fitting.
Manufacturer part no.
9842
GC number
E01-779
Showing prices

£230.46

£192.05 ex. VAT · VAT at 20%

Available to order · 3 working days
Available to order · 3 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

This is a gas valve for Vokera gas boilers, supplied under Vokera part number 9842 and built on the Honeywell VK4105C1058 valve body. It regulates the flow of gas to the burner on Mynute SE series appliances, opening and modulating supply in response to the boiler's demand signal. It is a service component intended for replacement by a competent heating engineer.

Signs this part needs replacing

  • The boiler fails to light or drops out shortly after ignition with no other fault indicated.
  • Gas pressure at the burner cannot be set or held within the manufacturer's stated range.
  • The valve body shows signs of leakage, staining or a smell of gas around the assembly.
  • The valve does not respond to demand, or the boiler cycles erratically on heating and hot water.
  • Solenoid or coil faults prevent the valve from opening or closing cleanly.

Before you order

  • Confirm the boiler model and GC number against the fitment list above.
  • Check the valve reference stamped on the existing valve matches VK4105C1058.
  • Verify the fault is with the valve itself and not with the wiring, PCB or gas supply.
  • Gas work must be carried out by a Gas Safe registered engineer, with the appliance recommissioned and pressure-tested after fitting.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.