Heatrae Sadia
Heatrae Sadia Thermostat/Cut-Out 95612722
Indirect combined thermostat and cut-out with spade terminals for Heatrae Sadia Megaflo ECO Systemfit ErP and Megaflo appliances.
At a glance
- Also known as 1736707
£54.00
£45.00 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Heatrae Sadia 95612722 is an indirect combined thermostat and cut-out supplied with spade terminals. It performs two roles on the cylinder: regulating the stored water temperature and acting as a safety cut-out if the set point is exceeded. It is used across Heatrae Sadia Megaflo ECO Systemfit ErP packages and Megaflo products.
Signs this part needs replacing
- Stored water no longer reaches the set temperature, or runs hot and cold without adjustment.
- The safety cut-out trips repeatedly and needs resetting.
- The cylinder overheats or the high-limit cut-out operates before the thermostat set point is reached.
- Temperature control becomes erratic, with the heat source cycling on and off at short intervals.
- Visible damage, corrosion or looseness at the spade terminals.
Before you order
- Confirm the appliance model and that the existing thermostat is the indirect type.
- Check the terminal arrangement on the existing part matches the spade terminals on this unit.
- Verify the part number 95612722 against the manufacturer's parts list for your cylinder.
- Isolate the electrical supply to the cylinder before removing or fitting any thermostat.
Compliance
| Alternative numbers | 1736707 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| HEATRAE SADIA HEATRAE SADIA PRODUCTS | — | — | — | |
| HEATRAE SADIA MEGAFLO ECO SYSTEMFIT ErP (PACKAGE WITH HI-MAX STORE 125L) | — | — | — | |
| HEATRAE SADIA MEGAFLO ECO SYSTEMFIT ErP (PACKAGE WITH HI-MAX STORE 145L) | — | — | — | |
| HEATRAE SADIA MEGAFLO ECO SYSTEMFIT ErP (PACKAGE WITH HI-MAX STORE 170L) | — | — | — | |
| MEGAFLO MEGAFLO PRODUCTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.