Heatrae Sadia Element Cut-Out 95612691

The Heatrae Sadia 95612691 is a dry cut-out used on the element circuit of unvented water heaters. It sits in the element control chain and interrupts the supply if the element overheats, protecting the cylinder and the surrounding components. It is a serviceable spare for the Heatrae Sadia Supreme range and Santon water heaters.

• The cylinder runs cold because the cut-out has tripped and will not reset
• The reset button will not latch, or the cut-out trips again immediately after resetting
• Continuity across the cut-out is open when the element circuit should be live
• Visible scorching, discolouration or heat damage around the cut-out terminals
• Repeated nuisance tripping of the element circuit with the thermostat and element testing correctly

• Confirm the appliance model and, where applicable, the serial number against the fitment list
• Check the existing cut-out in the appliance to confirm the part number and terminal arrangement
• Isolate the electrical supply and confirm the cylinder is depressurised before any work
• If the cut-out has tripped, establish why before replacing it, as a failed thermostat or element can cause repeat tripping