Valor
Valor Combined 57/90D Re-Set Thermal Cut-Out 93793789
Valor combined 57/90D re-settable thermal cut-out, part number 93793789, for Valor Group appliances.
At a glance
- Part type: combined re-settable thermal cut-out
- Also known as 2571058
£30.12
£25.10 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
A combined re-settable thermal cut-out supplied by Valor under part number 93793789. It is designated 57/90D and is used as an overheat safety device on Valor Group boiler appliances. The cut-out breaks the heating circuit when an overheat condition is detected and can be reset once the appliance has cooled.
Signs this part needs replacing
- The appliance fails to fire or produce heat with no other fault identified
- The thermal cut-out has tripped and will not reset
- The cut-out trips again shortly after being reset
- A continuity test across the cut-out reads open circuit
- Overheat symptoms persist after the control thermostat has been checked
Before you order
- Confirm the appliance model against the manufacturer's parts list
- Check the part number and 57/90D designation on the existing cut-out
- Confirm the fitted component is the combined re-settable type
- Establish whether the fault lies with the cut-out or with the control thermostat
Compliance
| Alternative numbers | 2571058 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| VALOR VALOR GROUP SPARE PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.