Worcester Bosch Pipe Clip 13mm Wire 87186869790

The Worcester Bosch 87186869790 is a wire pipe clip sized for 13 mm pipework, used to hold and locate pipe runs within the appliance. It sits in the clips, pins and springs group of Worcester Bosch spares and is fitted across the Greenstar i ErP System boiler range. The clip keeps the pipe seated in its correct position so the run stays stable during operation and routine servicing.

• The pipe run is loose and can be moved by hand at the clip position
• The clip is cracked, snapped or has lost its spring tension
• Scuffing or rubbing marks on the pipe where it has contacted the casing or an adjacent component
• Vibration or rattling from the pipework that stops when the pipe is held steady
• The clip is missing following an earlier service or repair

• Check the GC number and the appliance serial plate to confirm the model before ordering.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
• Measure the pipe at the clip position to confirm it is 13 mm.
• Cross-check the alternative number 1030913 against any previous documentation for the appliance.