Worcester Bosch Clip 19.2mm 87186674550

The Worcester Bosch 87186674550 is a 19.2 mm retaining clip from the manufacturer's clips, pins and springs range. It is used on Greenstar CDI ErP Classic appliances to hold pipework, hoses and small components firmly in position, keeping joints seated and limiting movement and vibration in service. The clip is a small but load-bearing fixing, so a cracked or weakened example can allow the part it secures to work loose.

• The clip has snapped, opened up or lost its spring tension, so it no longer grips the component it secures
• A hose, pipe or fitting held by the clip has started to move, weep or vibrate during operation
• Visible corrosion, pitting or surface cracking on the clip body
• The clip has been removed for access during a repair and will not refit securely
• A joint that was previously dry shows signs of seepage after the clip has been disturbed

• Check the appliance GC number and model against the compatibility list before ordering, as the same clip size is used across several Greenstar CDI ErP Classic variants
• Confirm the existing clip is the 19.2 mm size and that the part number 87186674550 matches the item being replaced
• Inspect any seal, O-ring or gasket at the joint being disturbed and replace it if it is hardened or damaged
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.