Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Worcester Bosch O-Ring 2.62mm x 11.91mm 87161408020

Worcester Bosch

Worcester Bosch O-Ring 2.62mm x 11.91mm 87161408020

Worcester Bosch nitrile O-ring, 2.62mm cross-section x 11.91mm inner diameter, part 87161408020, for a range of Worcester Bosch gas appliances.

At a glance

  • Part type: Gaskets, O-rings, seals and washers
  • Also known as 1017533
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
87161408020
GC number
299-479
Showing prices

£3.95

£3.29 ex. VAT · VAT at 20%

Available to order · 3 working days
Available to order · 3 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Worcester Bosch 87161408020 is a nitrile O-ring with a 2.62mm cross-section and an 11.91mm inner diameter. It sits within the O-rings and lip seals group of Worcester Bosch spares and forms a compression seal at a joint inside the appliance, holding back water at that connection point. Nitrile is the standard elastomer for this duty, offering resistance to water and the additives found in a domestic heating system.

Signs this part needs replacing

  • Water weeping or a slow drip at the joint the O-ring seals
  • Visible hardening, flattening, cracking or a shiny glazed surface on the ring
  • Persistent pressure loss traced to a sealed connection rather than pipework
  • Scale or mineral deposits sitting in the seal groove
  • Damp staining or corrosion around the joint on the appliance casing or nearby components

Before you order

  • Check the appliance GC number or serial plate against the compatibility list to confirm the correct seal for your model.
  • Cross-reference the alternative numbers 1017533 and ZMMIS154 before ordering, as these identify the same item.
  • Inspect the seal groove and mating face while the joint is open; a scored or corroded face will not seal reliably with a new ring alone.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.