Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Worcester Bosch Fan Assembly 24i Junior 87161056520

Worcester Bosch

Worcester Bosch Fan Assembly 24i Junior 87161056520

At a glance

  • Part type: Fan assembly
  • Also known as 1014683, N7035
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
87161056520
GC number
H05-408
Showing prices

£100.50

£83.75 ex. VAT · VAT at 20%

In stock
Cut-off passed — dispatches next working day
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Worcester Bosch 87161056520 is a fan assembly used in the Worcester 24i Junior and 28i Junior RSF range of gas boilers. It draws combustion air into the burner and pushes the products of combustion out through the flue, so the boiler can fire safely and hold a stable flame. Because it sits at the heart of the combustion circuit, a worn or seized fan quickly shows up as poor ignition, noise or a lockout.

Signs this part needs replacing

  • The fan runs noisily, with rumbling, scraping or whining from the bearings.
  • The fan does not spin up when the boiler is called for heat, or spins intermittently.
  • The boiler locks out or fails to ignite, often with a fan or air pressure related fault code.
  • Repeated overheat trips or a boiler that fires briefly and then shuts down.
  • Visible damage, stiffness or contamination around the fan impeller or housing.

Before you order

  • Confirm the appliance model and GC number against the compatibility list, as the 24i and 28i Junior variants use different configurations.
  • Check the numbers on the existing fan against 87161056520 and the alternative numbers listed above before ordering.
  • Inspect the fan mounting gasket or seal and replace it if it is compressed, torn or perished, so the combustion circuit stays airtight.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.