Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Viessmann Ionization Cable Inside L390 7822949

Viessmann

Viessmann Ionization Cable Inside L390 7822949

Viessmann ionization cable inside L=390, part 7822949, for Vitodens 333-F, Wb2A and Wb3A gas boilers.

At a glance

  • Appliance family: Vitodens gas boilers
  • Also known as 2320558
Manufacturer part no.
7822949
Showing prices

£58.43

£48.69 ex. VAT · VAT at 20%

Available to order · 7 working days
Available to order · 7 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Viessmann ionization cable inside L=390, part 7822949, is a flame sensing lead used on Vitodens gas boilers. It carries the ionization signal from the burner electrode back to the boiler control, which uses that signal to confirm a flame is present. The cable is supplied at the L=390 length designation listed for this part.

Signs this part needs replacing

  • The boiler locks out shortly after the burner lights, with a flame detection fault recorded.
  • The ignition sequence runs but the burner shuts down because no flame signal reaches the control.
  • Intermittent lockouts that clear when the lead or its connector is disturbed.
  • Visible damage to the cable insulation, the connector or the electrode end of the lead.

Before you order

  • Confirm the boiler model and serial number against the fit list above.
  • Check the routing and the L=390 length designation against the cable being removed.
  • Match the part number 7822949 to the number on the existing lead.
  • Inspect the ionization electrode and its connector at the same time, in case they also need attention.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.