Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Baxi Wiring Harness 3 Way Valve Pump Fan 720774401

Baxi

Baxi Wiring Harness 3 Way Valve Pump Fan 720774401

Baxi wiring harness (720774401) linking the 3-way valve, pump and fan on Neta-Tec Combi and Neta-Tec Plus Combi gas boilers.

At a glance

  • Part type: Wiring harness
  • Also known as 1119938
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
720774401
GC number
H90-622
Showing prices

£64.80

£54.00 ex. VAT · VAT at 20%

Available to order · 3 working days
Available to order · 3 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Baxi 720774401 is a wiring harness that carries the electrical connections between the 3-way valve, the circulating pump and the fan on Baxi Neta-Tec Combi appliances. It is the factory loom for that group of components, terminating in the plugs and connectors used on these boilers. Fitting the correct harness keeps the control sequence between diverter valve, pump and fan intact.

Signs this part needs replacing

  • The fan fails to run or runs intermittently while the boiler calls for heat
  • The 3-way valve does not move between heating and hot water positions
  • The pump does not start when the boiler is switched on
  • Intermittent lockouts or fault codes that clear when the loom is disturbed
  • Visible damage to the harness: chafed insulation, heat-affected or corroded connector pins, or a plug that will not latch

Before you order

  • Check the GC number and appliance serial plate against the compatibility list to confirm the harness suits your model
  • Note the alternative part number 1119938 when cross-referencing older documentation
  • Inspect the mating plugs on the 3-way valve, pump and fan for damage before fitting a replacement harness
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.