Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Baxi Hydraulic Group 33kW 12 Litre 710061001

Baxi

Baxi Hydraulic Group 33kW 12 Litre 710061001

Baxi 710061001 hydraulic group, 33kW with 12 litre capacity, for Ecoblue and Neta-Tec combi boilers. Alternative number 1119640.

At a glance

  • Part type: Diverter valves and hydraulics
  • Also known as 1119640
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
710061001
GC number
726-834
Showing prices

£615.60

£513.00 ex. VAT · VAT at 20%

Available to order · 3 working days
Available to order · 3 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Baxi 710061001 is a hydraulic group rated at 33kW with a 12 litre capacity, listed by Baxi under the diverter valves and hydraulics part type. It sits at the centre of the combi boiler's water circuit, directing flow between the heating system and the domestic hot water plate heat exchanger as demand changes. The assembly is supplied as a replacement unit for the original fitted to the Ecoblue and Neta-Tec combi ranges.

Signs this part needs replacing

  • Hot water runs cold or fails to reach temperature while the heating circuit still works
  • Domestic hot water temperature swings between hot and cold during a draw-off
  • Radiators warm up when only a hot water tap is opened
  • Water weeping from the hydraulic group body or from the diverter housing
  • The diverter fails to move through its full travel, leaving the boiler stuck in one mode

Before you order

  • Check the GC number and the appliance data badge to confirm the boiler model before ordering.
  • The alternative number 1119640 may appear in place of 710061001 on some documentation.
  • Inspect the seals and gaskets around the hydraulic group and renew any that are perished or flattened during the swap.
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.