Ecoflam
Ecoflam Probe Lead A30 Disc Head 65322007
Ecoflam probe lead with an A30 disc head, listed for use on Ecoflam oil boiler appliances.
At a glance
- Also known as 2150330
£33.76
£28.13 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Ecoflam probe lead A30 disc head is a replacement lead assembly for Ecoflam oil boiler appliances. It carries the sensing signal from the probe head back to the boiler control, where the flame condition is monitored. The A30 disc head is the mounting format of the probe end of this lead.
Signs this part needs replacing
- The boiler locks out repeatedly, particularly after the burner has fired and then shut down.
- Ignition is intermittent, with the burner failing to establish or hold a flame.
- The lead insulation is cracked, brittle or heat-damaged along its run.
- The probe head or lead terminals show corrosion, arcing marks or a loose connection.
- Fault-finding points to a break in continuity through the lead rather than the probe or control.
Before you order
- Confirm the existing probe head is the A30 disc head pattern before ordering.
- Check the appliance model against the manufacturer's parts list to confirm this lead is listed for it.
- Check the part number 65322007 against the number marked on the lead being replaced.
- Inspect the probe and control terminals as well, since a fault at either end can mimic a failed lead.
Compliance
| Alternative numbers | 2150330 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| ECOFLAM SPARES ECOFLAM PRODUCTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.