Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Ariston 65115141 Heating Element 3000W 220-240V

Ariston

Ariston 65115141 Heating Element 3000W 220-240V

Ariston 3000W 220-240V heating element, part 65115141, for heating water in Ariston domestic hot water and heating appliances.

At a glance

  • Part type: Immersion heater / heating element
  • Also known as 1596133
Manufacturer part no.
65115141
Showing prices

£42.52

£35.43 ex. VAT · VAT at 20%

In stock
Cut-off passed — dispatches next working day
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

This is a 3000W immersion-type heating element rated at 220-240V, manufactured by Ariston and supplied under part number 65115141. It is the electrical heating component that sits inside the water circuit of an Ariston appliance and raises the stored or flowing water to temperature under the control of the appliance's thermostat and PCB. The element is classed by the supplier under immersion heaters and heating elements, so it is a serviceable electrical spare rather than a hydraulic component.

Signs this part needs replacing

  • No hot water or consistently lukewarm water from an appliance that is otherwise running and calling for heat.
  • The element fails a continuity or resistance check, or reads open circuit across its terminals.
  • The RCD or circuit breaker trips when the appliance's heating cycle starts.
  • Heavy scale or corrosion on the element sheath, with blistering, splitting or a swollen appearance.
  • The element draws current but the water temperature does not rise, indicating a failed internal resistance wire.

Before you order

  • Check the appliance rating plate and serial number to confirm the model, then verify the element rating against the compatibility list below.
  • Confirm the replacement is rated 3000W at 220-240V; fitting an element of a different rating can overload the circuit or underperform.
  • Inspect the element housing seal and gasket seating before refitting, and replace the seal if it is hardened, split or compressed.
  • Isolate the electrical supply at the consumer unit and confirm dead before removing the old element; this is an electrical part and no gas work is involved.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.