Ariston
Ariston Thermostat (Manual Reset) 65112045
Manual reset thermostat for Ariston Kairos MACC cylinders, part number 65112045.
At a glance
- Also known as 1593266
£11.80
£9.83 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Ariston 65112045 is a manual reset thermostat used on Ariston Kairos MACC unvented cylinders. It monitors cylinder temperature and cuts the heat source if the set point is exceeded, requiring a manual reset before the appliance will run again. It forms part of the cylinder's thermal safety control rather than the primary temperature regulation.
Signs this part needs replacing
- The cylinder stops heating and the reset button will not latch or hold.
- The thermostat trips repeatedly, requiring reset after every heating cycle.
- No hot water despite the cylinder controls calling for heat.
- The reset trips at temperatures well below the normal cylinder set point.
- Visible damage, scorching or a loose or corroded connection at the thermostat terminals.
Before you order
- Confirm the cylinder model against the fit list above, including any CODE number shown on the data plate.
- Check the existing thermostat's part number and reset type before removing it.
- Isolate the electrical supply to the cylinder and verify the fault is with the thermostat rather than the cylinder controls or heating source.
- Confirm whether a manual reset device is the correct type for your installation.
Compliance
| Alternative numbers | 1593266 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| ARISTON KAIROS MACC CD1 150 CYLINDER (01 JUNE 2012) | — | — | — | |
| ARISTON KAIROS MACC CD1 200 CODE 3023258 CYLINDER (01 JUNE 2012) | — | — | — | |
| ARISTON KAIROS MACC CD1 300 CODE 3023259 CYLINDER (01 JUNE 2012) | — | — | — | |
| ARISTON KAIROS MACC CD2 200 CODE 3023260 CYLINDER (01 JUNE 2012) | — | — | — | |
| ARISTON KAIROS MACC CD2 300 CODE 3023261 CYLINDER (01 JUNE 2012) | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.