Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Sime Safety Thermostat 6146720

Sime

Sime Safety Thermostat 6146720

Sime 6146720 safety thermostat with a 102°C cut-out, used on Format System 24 and 30 gas boilers.

At a glance

  • Also known as 102C-SAFETY-STAT, 2040586
Manufacturer part no.
6146720
Showing prices

£12.59

£10.49 ex. VAT · VAT at 20%

Available to order · 7 working days
Available to order · 7 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Sime 6146720 is a safety thermostat rated at a 102°C cut-out point, supplied as a gas boiler spare. It is fitted to boilers in the Sime Format System range, where it acts as an overheat limit device and interrupts the burner circuit if the water temperature exceeds its set point. The part carries the alternative reference 102CSAFETYSTAT.

Signs this part needs replacing

  • The boiler locks out repeatedly without an obvious fault elsewhere in the heating circuit.
  • The lockout clears only after the appliance has cooled, then returns once it reaches temperature.
  • Continuity across the thermostat terminals does not change as expected when the sensing element is heated or cooled.
  • Visible damage, scorching or a loose or corroded terminal on the thermostat body.
  • The boiler fires briefly and then shuts down on the overheat limit rather than the normal control thermostat.

Before you order

  • Confirm the appliance model against the fit list above, including the EI and LPG variants where applicable.
  • Check the cut-out temperature marked on the existing thermostat matches the 102°C rating of this part.
  • Compare the part number on the existing component with 6146720 or the alternative reference 102CSAFETYSTAT.
  • Refer to the boiler's service documentation for the correct test and replacement procedure before fitting.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.