Altecnic
Altecnic DN125 Flanged PN16 Direct Acting Pressure Reducing Valve 576122
Altecnic DN125 flanged PN16 direct acting pressure reducing valve for holding a set downstream pressure.
£8,726.27
£7,271.89 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Altecnic DN125 Flanged PN16 Direct Acting Pressure Reducing Valve is a direct acting valve that reduces a higher inlet pressure to a steady, lower outlet pressure. It is built for DN125 pipework with PN16 flanged connections. The valve regulates downstream pressure without needing an external pilot or power supply.
Signs this part needs replacing
- Downstream pressure creeps up or will not hold at the set value
- The valve passes water through when it should be closed
- Water weeping from the body, bonnet or flange joints
- Chatter, hammer or excessive noise through the valve under flow
- The adjusting mechanism no longer responds or has seized
Before you order
- Confirm the pipework is DN125 and the flanges are PN16
- Check the required downstream pressure setting and flow range for the system
- Verify the valve is suitable for a direct acting installation in place of the existing unit
- Confirm the flange drilling and face-to-face arrangement match the pipework to be connected
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| ALTECNIC Pressure reducing Valves | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.