Hamworthy Flue Extension 500mm 573406026

This is a 500mm flue extension manufactured by Hamworthy, supplied under part number 573406026. It is a length of flue duct that adds to an existing flue run, allowing the terminal position to be set further from the appliance where the standard flue length will not reach.

Hamworthy reference 80125 appears alongside the part number and identifies this extension in the manufacturer's flue range. It is a passive flue component rather than a gas-carrying control part.

• Visible corrosion, pitting or perforation on the flue wall, particularly at joints and seams
• Dented or crushed sections that reduce the flue cross-section and affect combustion discharge
• Discoloured or degraded seals at the extension joint, with staining or condensate weeping
• Movement or insecurity in the flue run where the extension no longer sits square
• Flue gas readings or combustion analysis results outside the expected range after disturbance of the flue

• Confirm your appliance model against the compatibility list before ordering, as flue components are not interchangeable between ranges
• Measure the additional flue length required, allowing for the terminal position and any offsets, so 500mm is the correct increment
• Check whether the joint requires a specific flue seal or gasket, as these are separate items
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.