Altecnic Angled Tundish 1M x 1 1/4F 552160

The Altecnic Angled Tundish 1M x 1 1/4F is a tundish from the Altecnic Tundishes range. It is installed in relief valve discharge pipework on boiler and heating systems, where it provides an air gap so that discharge is visible and cannot be drawn back into the system. The angled body is intended to suit pipework routed to one side of the discharge point.

• Water escaping from around the tundish body rather than discharging cleanly through the funnel
• Cracking, distortion or corrosion visible on the tundish body
• Scale, debris or restriction blocking flow through the funnel
• Discharge no longer visible at the air gap during relief valve operation
• Staining or dampness on surrounding surfaces suggesting a poor seal or overflow

• Confirm the connection size and type on the existing pipework match the stated 1M x 1 1/4F format
• Check the tundish orientation suits the existing pipe route, as this is an angled fitting
• Verify the discharge pipework downstream of the tundish is correctly sized and terminated
• Check access for fitting and for future visual inspection of the air gap