Altecnic Pressure Reducing Valve 3/4M with Gauge 536051

The Altecnic 3/4M Pressure Reducing Valve with gauge is a brass-bodied pressure control valve for use on water supply pipework in heating and plumbing systems. It reduces a higher incoming supply pressure to a stable, regulated outlet pressure and incorporates a gauge so the set pressure can be read at the valve. It sits within the Altecnic Pressure Reducing Valves range.

• Outlet pressure creeps up or fluctuates instead of holding a steady set value.
• The gauge needle sticks, reads zero, or no longer responds to changes in pressure.
• Water weeps from the valve body, bonnet or gauge connection.
• Downstream flow drops noticeably or the valve becomes noisy in service.
• Pressure at outlets is higher than the set value and the adjuster no longer changes it.

• Confirm the pipework connection is 3/4M and matches the existing valve.
• Check the valve is being fitted within the Altecnic Pressure Reducing Valves range for the application.
• Check there is enough clearance around the valve body for the gauge and for adjustment access.
• Note the set outlet pressure required before installation so the valve can be adjusted on commissioning.