Altecnic Flow Limiter 1/2 MxF 16 L/Min Blue 534116

The Altecnic 1/2 MxF Flow Limiter is a flow regulation component that caps the flow rate through a circuit at 16 litres per minute. It is marked in blue and uses a 1/2 inch male x female connection arrangement. It is used within Altecnic flow regulation assemblies to hold a set flow rate across the appliance or circuit.

• Flow rate at the outlet is noticeably higher or lower than the rated 16 litres per minute, with no change to supply pressure.
• Flow becomes erratic, pulsing or restricted as scale or debris builds up in the limiter.
• Visible scale, sediment or corrosion deposits around the limiter body or inlet screen.
• Water weeping or dripping from the threaded connection that cannot be cleared by re-making the joint.
• The limiter has been removed, lost or damaged during servicing, leaving the circuit without flow control.

• Confirm the connection size and orientation required — this part is 1/2 inch male x female.
• Check the required flow rate for the appliance or circuit is 16 litres per minute.
• Verify the limiter is being fitted to an Altecnic flow regulation assembly.
• Confirm the colour code on the existing or specified limiter matches blue.