Buderus
Buderus Reducing Nipple G1 - G3/4 Inch 5317154
Buderus reducing nipple with G1 to G3/4 inch threads, used on G215 and G215 U appliances.
At a glance
- Appliance family: G215 / G215 U
- Also known as 2241176
£18.02
£15.02 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Buderus reducing nipple (G1 - G3/4 inch) is a threaded reducing fitting used to step between two different thread sizes on Buderus heating appliances. It is supplied under Buderus part number 5317154 and is listed for use within the G215 family of boilers. Its function is to provide a secure, sealed threaded transition between a G1 inch connection and a G3/4 inch connection.
Signs this part needs replacing
- Visible weeping or leakage at the threaded joint after the system has been refilled or run
- Corrosion, pitting or scale build-up on the nipple body or threads
- Cross-threaded or flattened threads that will not seal correctly on reassembly
- The fitting loosens or fails to hold torque during servicing
- Localised dampness or staining around the connection on the appliance casing or pipework
Before you order
- Confirm both thread sizes required at the connection point match G1 inch and G3/4 inch
- Check the Buderus part number 5317154 against the appliance documentation or existing component
- Verify the appliance model and output range against the fitment information listed above
- Inspect the mating threads and sealing faces for damage before fitting a replacement
Compliance
| Barcode / EAN | 4010009948391 |
|---|---|
| Alternative numbers | 2241176 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| BUDERUS G215/G215 U 40-85KW - 99908344 | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.