Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Main Limit Thermostat 5111378

Main

Main Limit Thermostat 5111378

Limit thermostat for Main Multipoint FF and Multipoint FF ErP water heaters.

At a glance

  • Part type: limit thermostat (limit stat)
  • Also known as 1160720
Manufacturer part no.
5111378
GC number
H18-876
Showing prices

£52.32

£43.60 ex. VAT · VAT at 20%

Available to order · 1 working day
Available to order · 1 working day
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Main 5111378 is a limit thermostat used on Main Multipoint FF water heaters. It acts as a safety cut-out, interrupting the heat source if the appliance overheats or the set limit temperature is exceeded. It is listed within the water heater spares range under thermostats.

Signs this part needs replacing

  • The appliance cuts out during use and will not run until the limit stat is manually reset
  • Repeated lockouts on the water heater with no other fault found
  • No hot water production because the safety cut-out has tripped and stays open
  • The limit stat fails to reset, or resets and trips again almost immediately
  • Continuity testing across the stat shows an open circuit when it should be closed

Before you order

  • Confirm the appliance model is a Main Multipoint FF or Multipoint FF ErP
  • Check the existing limit stat part number against 5111378 before removing it
  • Verify the fault is with the limit stat itself and not a separate overheat cause such as poor circulation or a scaled heat exchanger
  • Isolate the appliance from the power and water supply before any inspection or replacement work

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.