Aqualisa Fixed Head Conversion Kit Built-In Pipework Chrome 308001

The Aqualisa fixed head conversion kit is a chrome-finished assembly used to adapt an existing shower installation with built-in pipework so that a fixed shower head can be fitted. It is supplied by Aqualisa under part number 308001 and forms part of the shower fitting and outlet hardware rather than the water-heating or mixing side of the appliance. The kit provides the connection and mounting interface between concealed pipework and a wall-mounted fixed head.

• The fixed head no longer sits square or secure against the wall, or the mounting interface has worked loose.
• Water weeps from the joint between the concealed pipework and the head assembly during use.
• Visible corrosion, pitting or flaking on the chrome body or the connection threads.
• The head cannot be re-seated or adjusted because the conversion components are damaged or seized.
• A replacement head will not mate correctly with the existing built-in pipework outlet.

• Confirm the existing installation uses built-in pipework and that the outlet arrangement matches this conversion kit.
• Check the part number on the original fitting instructions or on the component being replaced, and cross-check against 308001 and 7020254.
• Inspect any seals and washers at the outlet before refitting, and renew them if they are compressed or perished.
• Isolate the water supply and depressurise the shower before dismantling the existing head assembly.