Navien
Navien Fan Assembly Premix Blower 30013834A
Navien premix blower fan assembly, part number 30013834A, for NPE-AWE CE-24A and NPE-SWE CE-24S boilers.
At a glance
- Part type: fan assembly, premix blower
£209.48
£174.57 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Navien 30013834A is a fan assembly supplied as a premix blower for Navien condensing boilers. It moves the air and gas mixture into the combustion chamber and discharges flue products, so combustion and modulation depend on it running correctly. It is listed by the manufacturer for the NPE-AWE CE-24A and NPE-SWE CE-24S models.
Signs this part needs replacing
- Whining, grinding or rumbling noise from the fan housing during operation
- Boiler fails to ignite or locks out repeatedly on start-up
- Fan runs erratically or does not reach the speed demanded by the boiler
- Visible vibration, play in the impeller, or signs of overheating at the fan body
- Debris, corrosion or water damage inside the blower housing
Before you order
- Confirm the boiler model and serial number against the fitment list above
- Check the part number on the existing blower before ordering
- Inspect the fan gasket, mounting screws and electrical plug for damage that may also need attention
- Isolate the power and gas supply before removing the existing blower
No specification data held for this part.
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| NAVIEN NPE-AWE CE-24A - (Serial Number 5093) | — | — | — | |
| NAVIEN NPE-AWE CE-24A - (Serial Number 5093) | — | — | — | |
| NAVIEN NPE-SWE CE-24S - (Serial Number 5094) | — | — | — | |
| NAVIEN NPE-SWE CE-24S - (Serial Number 5094) | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.