Reznor
Reznor Differential Pressure Switch 30 60611
Differential pressure switch, part 30 60611, for Reznor PV and RPV room sealed unit heaters.
At a glance
- Also known as 2530158
£795.74
£663.12 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Reznor 30 60611 is a differential pressure switch supplied for Reznor room sealed unit heaters. It responds to a difference in pressure between two sensing points and signals the appliance control circuit accordingly. The supplied product name identifies it as a HUBA differential pressure switch.
Signs this part needs replacing
- The appliance fails to fire or locks out during the start-up sequence
- The fan runs but the ignition sequence does not complete
- The burner shuts down mid-cycle with no other obvious cause
- Repeated lockouts that require a manual reset
- Intermittent running that points to unstable pressure sensing
Before you order
- Confirm the part number on the existing switch matches 30 60611
- Check the appliance model against the fit list above
- Inspect the pressure sensing tubes and connections for blockage or damage before condemning the switch
Compliance
| Alternative numbers | 30-60611, 2530158 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| REZNOR PV100 - ROOM SEALED UNIT HEATER | — | — | — | |
| REZNOR PV125 - ROOM SEALED UNIT HEATER | — | — | — | |
| REZNOR PV150 - ROOM SEALED UNIT HEATER | — | — | — | |
| REZNOR PV175 - ROOM SEALED UNIT HEATER | — | — | — | |
| REZNOR PV200 - ROOM SEALED UNIT HEATER | — | — | — | |
| REZNOR PV225 - ROOM SEALED UNIT HEATER | — | — | — | |
| REZNOR PV250 - ROOM SEALED UNIT HEATER | — | — | — | |
| REZNOR PV300 - ROOM SEALED UNIT HEATER | — | — | — | |
| REZNOR PV400 - ROOM SEALED UNIT HEATER | — | — | — | |
| REZNOR RPV100 - ROOM SEALED UNIT HEATER | — | — | — |
Showing 10 of 18 compatible appliances.
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.