Vokera
Vokera By-Pass Valve 20007783
Vokera heating by-pass valve, part number 20007783, for Compact 24 SE and Linea ONE boilers.
At a glance
- Also known as 1532845
£3.08
£2.57 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Vokera by-pass valve (part number 20007783) is a heating circuit component used in Vokera gas boilers. It regulates flow through the primary heating circuit, maintaining a minimum flow rate through the heat exchanger when system demand falls. It is listed by the manufacturer as a heating by-pass valve for the Vokera Compact 24 SE and Linea ONE appliance families.
Signs this part needs replacing
- Boiler locks out or overheats when most radiator valves are closed
- Whistling, humming or rattling noise from the boiler on low system demand
- Poor or uneven heat output across the radiators
- Water weeping or staining around the valve body or its connections
- Flow and return temperature difference outside the expected range during commissioning checks
Before you order
- Confirm the boiler model and GC number against the appliance data badge
- Check the existing valve body and connections for the correct configuration before removal
- Isolate the appliance and drain down as required before fitting
- Verify the part number 20007783 on the existing component where it is legible
Compliance
| Alternative numbers | 1532845 |
|---|
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| VOKERA COMPACT 24 SE | 47-364-06 | 47-364-06 | — | — |
| VOKERA LINEA ONE | 47-364-03 | 47-364-03 | — | — |
| VOKERA VOKERA COMPACT 24 SE | — | — | — | |
| VOKERA VOKERA LINEA ONE | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.