Ideal Conversion Kit LPG NGCNV 179008

The Ideal 179008 is a gas conversion kit listed for the Logic Code Combi ESP1 33 and for Ideal Commercial appliance parts. It is the kit used when the appliance is changed over between gas types, so the boiler can be set up to run correctly on the fuel supply it is connected to.

The kit carries the Ideal part number 179008 and the alternative number 8904417, and is identified on the appliance data plate by GC number 47-349-36. It is a service item rather than a routine wear part, so it is normally ordered when a conversion is being carried out or when the existing conversion components are being replaced.

• The boiler has been moved to a different gas supply and the existing conversion components are not correct for the fuel in use.
• Combustion readings taken at the flue are outside the range expected for the gas type the appliance is running on.
• The flame picture is unstable, with lifting, yellowing or excessive noise at the burner.
• The appliance locks out or fails to establish a steady flame after a gas changeover.
• Commissioning cannot be completed because the conversion components fitted do not match the appliance's data plate.

• Check the GC number on the appliance data plate against 47-349-36, and confirm the model is a Logic Code Combi ESP1 33 or an Ideal Commercial unit listed above.
• Have the alternative number 8904417 to hand if you are cross-referencing an older parts list.
• Confirm the gas type the appliance will run on, as the kit is specific to the LPG / NG changeover.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.