Ideal Conversion Kit Logic Combi C30 178995

The Ideal 178995 is a gas conversion kit for the Logic Combi C30 range, used to set the appliance up for LPG or natural gas operation. It is supplied by Ideal as a service part for the Logic Combi family and is fitted when the fuel type of an installation changes or when the existing conversion components need replacing during a repair or commissioning visit. Because the kit sits within the combustion setup of the appliance, the boiler must be re-commissioned and its settings checked after fitting.

• The appliance is being changed over to a different gas family and the correct conversion components are not currently fitted.
• The flame picture at the burner is poor or unstable following a fuel change or previous conversion work.
• Commissioning cannot be completed because conversion components are missing from the appliance.
• Existing conversion parts are damaged, corroded or have been partially lost during earlier service work.
• A replacement kit is required to return a previously converted appliance to its original fuel setting.

• Check the model plate and GC number on the appliance against the compatibility list before ordering.
• Confirm the alternative part number 8904412 matches the number on the existing component or on the manufacturer's parts listing.
• Check whether any seals or gaskets disturbed during the conversion are also required for the job.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.