Ideal
Ideal Fumes Chamber Closure 177995
Ideal 177995 fumes chamber closure for Ideal Commercial appliances including the Evojet 1250 Moduate 0 to 10V 3PH R.
At a glance
- Part type: fumes chamber closure
- This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
£3,172.06
£2,643.38 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Ideal 177995 is a fumes chamber closure supplied by Ideal for its Commercial appliance range. It forms the closing face of the combustion and fumes chamber, sealing the chamber so that flue gases are retained and directed along the correct path to the flue. The part is listed against Ideal Commercial equipment and is a gas-carrying component, so it must be fitted and checked by a competent engineer.
Signs this part needs replacing
- Corrosion, cracking or heat distortion visible on the closure plate
- Soot staining or discolouration around the chamber joint
- Flue gas readings that drift or fail to settle during combustion analysis
- A closure that will not sit flat or seal correctly when the chamber is reassembled
- Evidence of leakage at the chamber face found during a service
Before you order
- Check the appliance model and serial number against the compatibility list before ordering.
- This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
- Inspect the chamber gasket or seal at the same time and renew it if it is compressed or damaged.
- Confirm the number 177995 against the marking on the existing component.
Mechanical
| Part type | Fumes Chamber Closure |
|---|
Compliance
| Manufacturer part number (MPN) | 177995 |
|---|---|
| Commodity code | 8403 90 90 00 |
| GPC classification | Household Boilers/Furnaces/Tank Water Heaters Replacement Parts/Accessories |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| IDEAL COMMERCIAL EVOJET 1250 MODUATE 0 TO 10V 3PH R | — | — | — | |
| IDEAL COMMERCIAL IDEAL COMMERCIAL PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.