Ideal Flow Pipe System IE 177763

The Ideal 177763 is a flow pipe from the System IE range, listed by the manufacturer under hoses and pipes. It forms part of the internal pipework that carries water through the appliance, connecting the heat exchanger circuit to the boiler's primary flow connections.

It is an Ideal component intended for the Logic System IE family of boilers, and it is also listed against Ideal Commercial models. The part is not classified as a gas-carrying component.

• Visible weeping or staining at the pipe connections or along the pipe run
• Scale or debris build-up restricting flow through the pipe
• Kettling or noisy operation linked to poor circulation in the primary circuit
• Repeated overheat or flow temperature faults after the pump and other circulation components have been checked
• Corrosion or pitting on the pipe surface, particularly where it passes close to a joint

• Check the GC number on the appliance rating plate against the list above before ordering, as the same part number can be listed against several model variants.
• Confirm the part number 177763 or the alternative number 8904403 matches the component being replaced.
• Inspect the seals, washers and connections at each end of the pipe and replace any that are perished or deformed at the same time.