Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Ideal Wiring Harness Opentherm 177555

Ideal

Ideal Wiring Harness Opentherm 177555

Ideal 177555 Opentherm wiring harness for Logic Combi E and ES models from prefix ABK onwards; connects the boiler PCB to the OpenTherm control interface.

At a glance

  • Part type: Wiring harness (OpenTherm)
  • Appliance family: Ideal Logic Combi E and ES
  • Also known as 1777714
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
177555
Showing prices

£12.38

£10.32 ex. VAT · VAT at 20%

Available to order · 3 working days
Available to order · 3 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ideal 177555 is an OpenTherm wiring harness supplied as a spare for Ideal Logic Combi appliances. It is the lead that carries the OpenTherm communication signal between the boiler's control PCB and the external OpenTherm room thermostat or control interface. The harness is specific to appliances built from prefix ABK onwards, so the boiler serial prefix must be checked before ordering.

Signs this part needs replacing

  • The boiler does not respond to an OpenTherm thermostat, or responds intermittently
  • OpenTherm communication or connection fault codes appear on the boiler display
  • The appliance runs only on its own internal controls and ignores the external programmer
  • Visible damage to the lead: chafed insulation, a cracked plug body or corroded pins
  • Loose or intermittent contact at the PCB or thermostat end of the harness

Before you order

  • Check the appliance GC number and serial prefix; this harness is listed for units from prefix ABK onwards
  • Confirm the existing part number on the boiler or in the installation literature matches 177555 or 1777714
  • Inspect the PCB connector and thermostat terminals for damage before fitting a replacement harness
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.