Ideal
Ideal Flange Gasket DN50 PN6 177324
Ideal flange gasket, DN50 PN6, part number 177324, for Ideal Commercial appliances and boiler flange joints.
At a glance
- Part type: Flange gasket
- Appliance family: Ideal Commercial
- Also known as 1180495
£8.12
£6.77 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Ideal 177324 is a flange gasket rated DN50 PN6, used to seal a bolted flange joint on Ideal Commercial appliances. It sits between the mating flange faces and compresses under bolt load to stop water escaping at the joint. As a wear item it is replaced whenever the flange is broken and remade, or when the existing gasket has hardened or split.
Signs this part needs replacing
- Water weeping or dripping from the flange joint, often visible as staining or scale on the pipework below
- A visible trickle or spray at the joint when the appliance is running or the system is under pressure
- The gasket face is cracked, perished, flattened or stuck to the flange when the joint is opened
- Repeated pressure loss on the system with no other obvious source
- Corrosion or rust tracking around the bolt holes and flange faces
Before you order
- Confirm the flange size and pressure rating on the appliance match DN50 PN6 before ordering
- Check the appliance model and serial number against the compatibility list to confirm 177324 is the correct gasket
- Note the alternative number 1180495 when cross-referencing older documentation or stock records
- Inspect the flange faces and bolts while the joint is open, as a damaged face will not seal with a new gasket alone
Mechanical
| Part type | Flange gasket |
|---|---|
| Appliance family | Ideal Commercial |
Compliance
| Manufacturer part number (MPN) | 177324 |
|---|---|
| Commodity code | 8484 90 00 00 |
| GPC classification | Household Boilers/Furnaces/Tank Water Heaters Replacement Parts/Accessories |
| Alternative numbers | 1180495 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| IDEAL COMMERCIAL IDEAL COMMERCIAL PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.