Ideal Injector Kit 2.65mm Diameter 177154

The Ideal 177154 Injector Kit is a replacement injector assembly with a 2.65 mm diameter injector, produced by Ideal for use in its commercial appliance range. The injector forms part of the combustion assembly and controls the metered flow into the burner, so its bore size and condition directly affect how the appliance burns. The kit is supplied as a complete assembly, making it straightforward to swap out during a service or repair.

• The burner flame is uneven, lifting or visibly different from the expected pattern.
• Soot deposits or discolouration appear around the burner or combustion chamber.
• The appliance struggles to reach or hold its rated output.
• Combustion readings drift outside the expected range and cannot be corrected by adjustment alone.
• The injector bore is blocked, worn or visibly damaged on inspection.

• Confirm the appliance model and serial number against the compatibility list, as injector sizes differ between variants.
• Check the existing injector diameter matches the 2.65 mm bore before fitting.
• Inspect the injector seal or gasket at the same time and replace it if it is perished or compressed.
• Work on combustion components should be carried out by a competent, registered engineer.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.