Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Ideal Wiring Harness Timer External Control 176989

Ideal

Ideal Wiring Harness Timer External Control 176989

Ideal 176989 wiring harness for the timer and external control circuit, fitted to Ideal Logic+ Combi and Ideal Commercial appliances.

At a glance

  • Part type: wiring harness (timer / external control)
  • Also known as 1777705
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
176989
Showing prices

£15.19

£12.66 ex. VAT · VAT at 20%

Available to order · 3 working days
Available to order · 3 working days
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ideal 176989 is a wiring harness that links the timer and external control circuit to the appliance's main PCB. It carries the low-voltage switching signals between the programmer, room thermostat or external control input and the boiler's control board. The harness is supplied by Ideal for use across the Logic+ Combi range and Ideal Commercial appliances.

Signs this part needs replacing

  • The programmer or external control has no effect on heating or hot water demand
  • Intermittent operation when the timer calls for heat, with the boiler failing to respond
  • Visible damage to the loom, such as chafed, burnt or brittle conductors
  • Loose or corroded plug terminals at the PCB or control end
  • Fault codes or lockouts that appear only when an external control is connected

Before you order

  • Check the GC number and serial plate on the appliance to confirm the model before ordering
  • Confirm the existing harness carries the number 176989 or the alternative number 1777705
  • Inspect the control plug and PCB socket for damage, as a worn connector can mimic a faulty harness
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.