Ideal Injector and Housing Kit LPG 176591

The Ideal 176591 is an injector and housing kit intended for LPG-fuelled appliances in the Ideal range. The injector meters gas into the burner at a fixed rate, and the housing holds it in position on the manifold, so the two parts are supplied together as a matched assembly. It is used across the Independent and Logic+ families, where correct injector sizing is what keeps the gas rate and combustion readings within specification.

• Gas rate at the meter falls outside the figure quoted for the appliance, with no other cause found
• Combustion readings drift rich or lean and cannot be corrected at the gas valve
• Burner lights but the flame is unstable, lifts off the burner or burns with an uneven pattern
• Sooting or discolouration around the burner and heat exchanger after a short period of running
• Repeated ignition lockouts or flame supervision faults traced back to the injector area

• Confirm the appliance GC number against the compatibility list, as the same model name can be built to more than one specification
• Check the existing injector marking and the appliance data badge to confirm the LPG variant before fitting
• Note the alternative number 1782114 when cross-referencing against older documentation or stock records
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.