Ideal Burner Door Nut Kit 176398

The Ideal burner door nut kit, part number 176398, is a fixing set for the burner door on Ideal Commercial appliances. The nuts clamp the burner door against the combustion chamber face, holding the door and its seal in position through repeated heating and cooling cycles. Ideal lists this as a serviceable fixing kit for engineers removing and refitting the burner door during servicing or repair.

• Nuts seized or corroded after long service, making the burner door difficult to release
• Rounded or chewed hex flats caused by previous removal attempts
• Burner door failing to clamp evenly, so the door seal does not sit flat against the chamber face
• Heat discolouration, stretched threads or visible damage on the existing nuts
• Reused nuts that will not hold torque when the burner door is refitted

• Confirm your appliance model against the compatibility list before ordering.
• Inspect the burner door seal while the door is off and replace it if it shows hardening, cracking or heat damage.
• The alternative number 1180437 may appear on older Ideal documentation for the same kit.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.