Ideal Flue Manifold Bottom 100/120/150 Kit 176337

The Ideal 176337 is a bottom flue manifold kit forming part of the flue assembly on Ideal Commercial condensing boilers. It sits at the lower end of the flue run, where the flue path meets the appliance, and is supplied as a complete kit for the 100, 120 and 150 output models. As a flue component it is integral to safe combustion and correct discharge of flue gases.

• Visible corrosion, cracking or distortion on the manifold body or its flue connection points
• Condensate tracking or staining around the base of the flue, suggesting a failed joint or seal face
• Flue gas odour or draughts detected near the appliance flue connection
• Repeated flue-related fault codes or lockouts on the boiler controls
• Discolouration or heat damage on the manifold where it meets the appliance

• Confirm the appliance model and GC number against the compatibility list, as the kit covers several output sizes across two ranges
• Check the existing flue seals and gaskets before fitting, and replace any that are compressed, hardened or damaged
• Have the appliance serial number to hand when confirming the correct variant
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.