Ideal Gas Pipe 176308

The Ideal gas pipe 176308 is a gas-carrying pipe section used within Ideal Commercial appliance assemblies. It forms part of the internal gas route, carrying gas from the inlet connection through to the burner or gas valve assembly. As a manufacturer-supplied component it is shaped and sized to match the original pipework run in the appliance it serves.

• A smell of gas or a pressure drop identified during a tightness test on the appliance gas route
• Visible corrosion, pitting or surface rust along the pipe run
• A distorted, kinked or crushed pipe section restricting gas flow
• Joints that will not seal after re-making, or damaged pipe ends at the connection points
• A leak detection fluid test showing bubbling at the pipe or its fittings

• Confirm the appliance model and serial number against the compatibility list before ordering, as pipe runs differ between Ideal Commercial variants
• Check the existing pipe against part number 176308 and the alternative number 1180409 to confirm the correct item
• Inspect the associated seals, washers and jointing components at the same time, as these are often disturbed when a pipe is removed
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.