Ideal Gas Valve Kit 176283

The Ideal 176283 is a gas valve kit supplied by Ideal for use in its commercial appliance range. The gas valve regulates the flow of gas into the burner, opening and modulating on demand from the appliance's control board, so it sits at the centre of safe ignition and firing.

This kit is listed by the manufacturer under part type Gas Valve and carries the alternative number 1180361. It is intended for Ideal Commercial equipment rather than domestic wall-mounted boilers.

• The appliance fails to fire on a call for heat, with no gas reaching the burner.
• Repeated lockouts or flame-failure faults shortly after ignition.
• The burner lights but will not modulate, or drops out as demand changes.
• Erratic or intermittent ignition that cannot be traced to the ignition electrode or flame sensor.
• The valve body shows signs of leakage, corrosion or mechanical damage.

• Confirm your appliance model and, where available, its GC number against the compatibility list before ordering.
• Note the alternative number 1180361 so you can cross-check the part you are removing.
• Check whether a gasket or seal is required for the joint you are disturbing during the swap.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.