Ideal Condensate Sump Imax Plus 4 Module 176098

The condensate sump is the collection chamber at the base of the heat exchanger on Ideal Imax Plus 1 and Imax Plus 2 four-module commercial appliances. It gathers condensate produced during combustion and directs it towards the drainage outlet, so the flue gases and the heat exchanger surfaces stay clear of standing water. This is an Ideal-manufactured component supplied under part number 176098, with the alternative number 95211563.

• Water pooling inside the appliance casing or beneath the unit rather than draining away
• Visible cracking, distortion or perished material around the sump body
• Condensate escaping from the sump joint or seal area during operation
• Corrosion or scale build-up inside the chamber restricting the flow of condensate
• Repeated condensate trap blockages traced back to debris collecting in the sump

• Confirm the appliance model and serial number against the compatibility list before ordering, as the sump is specific to the four-module Imax Plus 1 and Imax Plus 2 build.
• Check the part number on the existing component or in the appliance documentation — 176098 and 95211563 refer to the same sump.
• Inspect the sump seal and any associated gasket at the same time; a new seal is often needed when the sump is removed and refitted.