Ideal Flue Connector Vertical 60/100 175741

The Ideal 175741 is a vertical flue connector with a 60/100 mm connection, produced by Ideal for its Independent Plus range and Ideal Commercial appliances. It sits within the flue system and carries the products of combustion away from the boiler while combustion air is drawn in through the outer annulus. As a flue component it is integral to safe operation, so it must be sound, correctly sealed and matched to the appliance it serves.

• Visible corrosion, cracking or distortion on the flue connector body or its joints
• Staining, damp patches or condensate tracking around the flue route
• Combustion readings outside the appliance's expected range during a service or analysis
• Boiler lockout, flame failure or repeated ignition faults linked to the flue path
• Perished or displaced seals where the connector meets the appliance or the flue run

• Check the appliance GC number and model plate against the compatibility list to confirm the correct flue component
• Confirm the alternative part number 1781464 if you are working from older documentation
• Check whether the seals or gaskets at the flue joint need renewing at the same time
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.