Ideal Fascia Kit Pre ABK 175724

The Ideal fascia kit, part number 175724, is the front casing panel that forms the lower face of the Logic+ Combi boiler. It is the pre-ABK variant, so it is intended for appliances built before the ABK revision of the casing arrangement. The panel covers and protects the control area behind it and carries the finished front surface of the appliance, so it is visible in normal use and takes the knocks that come with servicing and everyday handling.

• The fascia is cracked, split or broken around the fixing points after a service or a knock.
• The front panel is discoloured, scorched or heat-marked and no longer sits flat against the casing.
• Clips, lugs or screw fixings on the panel are snapped, so the fascia will not stay seated.
• The panel has been removed and the control area is left exposed, with the boiler front incomplete.
• The fascia no longer lines up with the control aperture, leaving a visible gap at the front of the appliance.

• Check the GC number on the appliance data badge against the compatibility list to confirm the boiler is a Logic+ Combi 24, 30 or 35.
• Confirm the existing panel is the pre-ABK type before ordering, as the casing arrangement differs across revisions.
• Note the alternative Ideal number 1781432 when cross-referencing against older paperwork or stock records.
• This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.