Checking hours…Mon–Fri 7:30am–5pm · Sat 9am–12pm01302 279234Trade account
Ideal 175562 Gas Valve Kit

Ideal

Ideal 175562 Gas Valve Kit

Ideal 175562 gas valve kit for Logic, Independent C and Logic+ domestic boilers, regulating gas flow to the burner.

At a glance

  • Appliance family: Logic, Independent C, Logic+
  • Also known as IDEAL175562
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Manufacturer part no.
175562
Showing prices

£204.00

£170.00 ex. VAT · VAT at 20%

In stock
Cut-off passed — dispatches next working day
Not certain it's the right part? The technical team verifies fitment before dispatch — no charge, and it stops a second trip.Call the technical teamSend a technical question

Same-day dispatch

Ordered by 4pm Mon–Fri, 10:30am Sat.

30-day returns

Unused, in original packaging.

What it is

The Ideal 175562 is a gas valve kit produced by Ideal for its Logic, Independent C and Logic+ family of domestic gas boilers. The valve controls the supply of gas to the burner, opening on a call for heat or hot water and modulating the gas rate to match the load demanded by the boiler. Because it sits in the gas train, it is a serviceable component that is replaced rather than repaired when it fails.

Signs this part needs replacing

  • The boiler fails to light, or locks out repeatedly with an ignition or flame-detection fault
  • The burner flame drops out shortly after ignition and the boiler returns to lockout
  • The gas rate cannot be set or held at the correct figure during commissioning
  • Heating or hot water becomes intermittent, with the boiler cycling on and off
  • Visible corrosion, debris or damage around the valve body or its connections

Before you order

  • Confirm the boiler model and GC number against the compatibility list, as this valve was used across several Logic variants
  • Check the part number on the existing valve or the boiler data badge before ordering
  • Have the boiler installation and servicing manual to hand for the gas rate and operating pressure settings
  • This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.

Not sure which part?

Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.