Ideal Inspection Cover Gasket 175466

The Ideal 175466 is an inspection cover gasket manufactured by Ideal for use on Ideal Commercial appliances. It sits between the inspection cover and its mating face, sealing the joint so the cover can be removed for inspection and refitted without leakage. The gasket is classed as a Gaskets, Seals & Washers spare and is supplied under the Ideal Spares brand.

• Weeping or staining around the inspection cover joint after the cover has been refitted.
• A gasket that has hardened, flattened or cracked and no longer compresses to fill the joint face.
• Visible perishing, splitting or deformation of the gasket material on removal of the cover.
• Repeated seepage at the cover after tightening, indicating the seal is no longer seating correctly.
• Discolouration or residue tracking across the gasket face where the joint has been passing.

• Confirm the appliance model and serial number, and check the compatibility list, as this gasket is listed for a single Ideal Commercial appliance.
• Note the alternative part number 1780907 so the correct item can be matched against any older documentation.
• Inspect the cover and joint face while the appliance is open; if other seals in the same assembly are perished, order them at the same time.
• Work on the appliance should be carried out by a competent engineer in line with the manufacturer's instructions.