Ideal Infill Panel Assembly With Brackets 175091

The Ideal 175091 is an infill panel supplied with its mounting brackets. It forms part of the outer casing assembly on Ideal Commercial appliances, closing off the section of the case that would otherwise be left open once the appliance is installed in its final position.

The panel sits within the casing line of the appliance and is held in place by the brackets that come with it. It is a cosmetic and protective component rather than a combustion or water-carrying part, so it is normally replaced after impact damage, corrosion or loss during servicing.

• The infill panel is bent, cracked or distorted after impact or handling.
• The panel no longer sits flush with the rest of the casing, leaving a visible gap.
• Mounting brackets are corroded, snapped or missing their fixing points.
• The panel rattles or works loose during operation.
• The casing line is incomplete after a service or appliance move.

• Confirm the appliance model and serial number against the compatibility list, as casing parts differ between Concord ESi variants.
• Check the existing panel and brackets for any additional damaged fixings that may also need attention.