Ideal
Ideal Wiring Harness Safety Control Ignition 175025
Ideal wiring harness (175025) linking the safety control to the ignition circuit on Commercial Concord ESi CPT U/A appliances.
At a glance
- Part type: Wiring harness
- This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
£118.63
£98.86 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
This is an Ideal wiring harness that runs between the safety control and the ignition connection on the appliance. It carries the ignition and safety control signals as a single pre-terminated loom, so the plug ends match the board and ignition components without any rewiring on site. It is used across the Ideal Commercial Concord ESi CPT U/A range.
Signs this part needs replacing
- The appliance fails to ignite, with no spark at the ignition electrode despite a call for heat
- Repeated lockouts that clear after the loom or its connectors are disturbed
- Brittle, cracked or heat-damaged insulation on the harness
- Corrosion, arcing marks or a loose fit at the safety control or ignition plug
- Fault codes or intermittent operation traced to the ignition circuit
Before you order
- Confirm the appliance model and serial number against the compatibility list, as the harness is specific to the Concord ESi CPT U/A range
- Check the existing loom for the alternative number 83584912 where it is marked on the cable or plug
- Inspect the ignition electrode and its lead at the same time, as damage there can mimic a harness fault
- Isolate the electrical supply before fitting and follow the manufacturer's wiring diagram for routing
- This part is fitted to a gas appliance; installation must be carried out by a Gas Safe registered engineer.
Mechanical
| Part type | Wiring harness |
|---|
Compliance
| Manufacturer part number (MPN) | 175025 |
|---|---|
| Commodity code | 8544 42 90 |
| GPC classification | Cabling/Wiring Protection/Wrapping |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| IDEAL COMMERCIAL CONCORD ESi 140 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ESi 160 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ESi 180 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ESi 200 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ESi 220 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ESi 260 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ESi 300 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ESi 340 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL CONCORD ESi 380 CPT U/A | — | — | — | |
| IDEAL COMMERCIAL IDEAL COMMERCIAL PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.