Ideal
Ideal Central Baffle 174691
Ideal 174691 central baffle for Ideal Commercial appliances, manufactured by Caradon. Alternative part number 1780336.
At a glance
- Part type: Central baffle
- Appliance family: Ideal Commercial
- Also known as 200004701, CENTRAL-BAFFLE-200004701, 1780336
£61.67
£51.39 ex. VAT · VAT at 20%
Same-day dispatch
Ordered by 4pm Mon–Fri, 10:30am Sat.
30-day returns
Unused, in original packaging.
What it is
The Ideal 174691 is a central baffle used in Ideal Commercial appliances. It is positioned inside the heat exchanger, where it directs the path of hot flue gases so that heat is transferred to the water circuit efficiently rather than passing straight out of the flue. The baffle is manufactured by Caradon for Ideal and is supplied as a single replacement component.
Signs this part needs replacing
- The appliance takes longer than expected to reach temperature, or heat output drops noticeably
- Repeated high-limit trips or overheating during firing
- Soot or combustion deposits building up around the heat exchanger
- Unusual rumbling or booming noise from the heat exchanger when the burner runs
- The baffle is found distorted, corroded, cracked or missing during a routine service
Before you order
- Check the appliance model and serial plate against the compatibility list before ordering
- Confirm the number on the baffle being removed matches 174691
- Inspect the heat exchanger seals and gaskets while access is available, as these are commonly disturbed when the baffle is refitted
- Work on the appliance should be carried out by a competent engineer in line with the manufacturer's instructions
Mechanical
| Part type | Central baffle |
|---|---|
| Appliance family | Ideal Commercial |
Compliance
| Manufacturer part number (MPN) | 174691 |
|---|---|
| Barcode / EAN | 5022141746918 |
| Alternative numbers | 200004701, CENTRAL-BAFFLE-200004701, 1780336 |
| Make | Model / assembly | Reference | Years | Fitment |
|---|---|---|---|---|
| IDEAL COMMERCIAL IDEAL COMMERCIAL PARTS | — | — | — |
Documents & drawings
Everything we hold for this part. Where a document exists but we don't hold it, the technical team will source it from the manufacturer — usually the same working day.
No documents held for this part. The technical team will source them from the manufacturer — usually the same working day.
No technical questions yet for this part.
Not sure which part?
Search by part number, product name or brand — our technical team confirms fitment before anything is dispatched.