Ideal Mains Harness F320-560 Slave 174678

The Ideal 174678 is a mains harness — the slave wiring loom used on Ideal Commercial Imax Xtra appliances in the F320-560 range. It carries the mains supply and associated control connections through the appliance, linking the slave section of the harness run to the rest of the electrical system. It is supplied as a single replacement loom for like-for-like fitting on the models listed below.

• The appliance loses mains power or fails to power up, with no supply reaching the board.
• Power cuts in and out during operation, or the appliance resets intermittently.
• Visible damage to the loom: chafed, cracked or heat-affected insulation, or exposed conductors.
• Discoloured, scorched or loose connector housings at either end of the harness.
• Fault codes or lockouts that trace back to a broken or intermittent supply connection rather than the board itself.

• Confirm the appliance model and serial number against the compatibility list, as the harness is specific to the F320-560 slave configuration.
• Check the existing loom's connector count and routing before ordering, so the replacement matches the run being replaced.
• Isolate the electrical supply at the fused spur and prove dead before removing the old harness.