Ideal Flow Manifold Imax Xtra F80 174434

This is an Ideal flow manifold, supplied under part number 174434. It is a hydraulic component used on Ideal Commercial appliances in the Imax Xtra range, where it distributes flow through the heat exchanger circuit. The manifold forms part of the appliance's water-side assembly and is matched to the Imax Xtra E80 and F80 models.

• Water weeping or visible staining around the manifold body or its connections
• Loss of system pressure that cannot be traced to any other part of the circuit
• Overheating or poor heat output caused by restricted flow through the manifold
• Scale or corrosion debris building up inside the manifold waterways
• Cracked or distorted manifold casting found during a service

• Confirm the appliance model and, where shown on the data badge, the GC number against the compatibility list
• Check the part number stamped or printed on the existing manifold matches 174434 before removal
• Inspect the manifold seals and gaskets on the appliance and renew them if they are compressed or perished
• Work on the appliance should be carried out by a competent person in line with current UK regulations